About Us

High-efficiency low-carbon hot-blast stove green intelligent Annec

Profile

Culture

Home page

Annike cone column rotary cutting top burning hot blast stove achieved another success in the second quarter

Time:

2021-08-22

Source:

Author:

In view of the development requirements of iron and steel industry adjustment policies for energy saving, emission reduction, quality improvement and efficiency improvement of ironmaking blast furnaces, Anneke has repeatedly won orders in the field of blast furnace ironmaking with the proprietary technology of green, low-carbon, environmentally friendly and efficient cone-column rotary cutting top-burning hot blast stove. After the first quarter achieved a good start, the second quarter achieved another good result, projects such as 2 × 1860m 6 rotary-cutting top-burning hot-blast stoves of a steel company in Tangshan, Hebei, 2 × 2850m 6 rotary-cutting top-burning hot-blast stoves of a steel company in Handan, Hebei, 1710m 4 cone-column rotary-cutting top-burning hot-blast stoves of a steel company in Handan, Hebei, etc. have been successively signed. At the same time, the major historical opportunity of the national "the belt and road initiative is actively seized, supported by the international patent of Annike cone, it has successively obtained international projects such as 1280m2 cone-column rotary cutting top-burning hot blast stove of a Russian steel company and 5872m3 3 cone-column rotary cutting top-burning hot blast stove of an Indian steel company.
In the second quarter, the company's construction sites were running well, and a number of key projects were either under construction or capped and put into production, interpreting the core culture of customer satisfaction with practical actions.
On April 3, the 3#1350m blast furnace of an iron and steel company in Shanxi was successfully put into operation. The hot blast furnace system was equipped with 4 Anneke cone column rotary cutting top-fired hot blast furnaces. At present, the average air supply temperature of pure blast furnace gas is above 1260 ℃, exceeding the expected effect.

On April 15, 4 hot blast stoves of 3#2400m blast furnace of a Jiangsu iron and steel company were successfully capped, 4 hot blast stoves of 1#2400m blast furnace were capped on April 25, 8 Anneke cone column rotary cutting top-burning hot blast stoves were equipped for the two blast furnaces, and 12 hot blast stoves of 3 blast furnaces were all supplied with refractory materials. Currently, they have entered the stage of full-scale masonry.

On May 8, a Zhejiang iron and steel company held a commencement ceremony for the intelligent technological transformation project of 2#2500m3 blast furnace. The full set of burner refractory materials for the hot blast stove system was supplied by Anneke.

On May 8, the new construction of 1# and 3#1350m blast furnace hot blast furnaces of a steel company in Shandong Province was successfully put into operation. The 6 rotary cutting top-burning hot blast furnaces configured in the hot blast furnace system were provided with EP service by Annike.

On May 10, the 1#1580m blast furnace of a Shanxi iron and steel company was officially put into operation. The hot blast furnace system was equipped with three Anneke cone column rotary cutting top-burning hot blast furnaces. At present, various parameters of the blast furnace have reached or exceeded the design indexes.

On May 31, four hot blast furnace shells of a 2770m blast furnace of an iron and steel company in Shandong were successfully capped. All the refractory materials of the four rotary cutting top-burning hot blast furnaces were integrated and supplied. Currently, they have entered the masonry stage.

On June 4, the hot blast stove of a 2#1260m blast furnace of a Shanxi iron and steel company was successfully ignited, so far all the 10 anke cone column rotary cutting top-burning hot blast stoves equipped with 3 blast furnaces were put into operation.

On June 18, 4 hot blast furnace shells of a 2# blast furnace of a Fujian iron and steel company were capped. The 2 1260m blast furnaces were equipped with 8 Annike cone column rotary cutting top burning hot blast furnaces and provided EP service. Currently, they have entered the masonry stage.

In the face of the double test of the once-in-a-century flood disaster and the new coronary pneumonia epidemic, Anneke people are united in actively organizing rescue and self-rescue, fully cooperating with the government's epidemic prevention and control work, fully implementing various epidemic prevention and control measures, accelerating the restoration of normal production order, striving to meet customer product delivery, and ensuring the normal construction of the construction site. Anneke has always been committed to continuously promoting the technological development of blast furnace hot blast stove and the progress of refractory technology, and has made unremitting efforts to become the preferred service provider of the global high temperature industry.

Real-time information